Products >> Mechanical Drive >>
EP 800 4 Ply Rubber Fabric Conveyor Belt For Mine and Stone
- Product No.:2020621143050
Product Introduction
EP conveyor belts ,also called EP conveyor belts ,whose tension resistant body is canvas woven by polyester in warp and nylon-66 in weft .The belts have the characteristics of low elongation in warp and good troughability in weft ,good water resistance ,good wet strength ,no mould, suitable for medium ,long-distance and heavy-load transportation of materials .Because of the high initial modulus of polyester ,the belts can choose a relative low safety factor.
Main Characteristics
1. Good elasticity ,anti-impact
2. High adhesion ,good flexing capacity
3. Good trough ability
4. Better stability of size and heat –resistanic compared with NN belt
5. Good water-proof ability
6. Little change in strength under dry or wet conditions
2-ply belts
Belt | Cover gauge dDp in mm | Belt thickness dG in mm |
Area related belt mass with cover type m"G in kg/m2 with cover type | |
---|---|---|---|---|
Top side : Bottom side | X | Y | ||
Data on the size parameter m"G apply only for the cover gauges as listed providing the range of tolerances: +1.7/−1.0 kg/m² | ||||
EP 400/2 | 4 : 2 | 9.5 | 11.0 | 11.5 |
EP 630/2 | 4 : 2 | 10.5 | 12.0 | 12.5 |
EP 800/2 | 4 : 2 | 11.0 | 12.5 | 13.0 |
3-ply belts
Belt | Cover gauge dDp in mm | Belt thickness dG in mm |
Area related belt mass with cover type m"G in kg/m2 with cover type | |
---|---|---|---|---|
Top side : Bottom side | X | Y | ||
Data on the size parameter m"G apply only for the cover gauges as listed providing the range of tolerances: +1.7/−1.0 kg/m² | ||||
EP 400/3 | 4 : 2 | 9.0 | 10.0 | 10.5 |
EP 500/3 | 6 : 3 | 12.0 | 13.5 | 14.0 |
EP 630/3 | 5 : 2 | 10.5 | 12.0 | 12.5 |
4-ply belts
Belt | Cover gauge dDp in mm | Belt thickness dG in mm |
Area related belt mass with cover type m"G in kg/m2 with cover type | |
---|---|---|---|---|
Top side : Bottom side | X | Y | ||
Data on the size parameter m"G apply only for the cover gauges as listed providing the range of tolerances: +1.7/−1.0 kg/m² | ||||
EP 500/4 | 4 : 2 | 10.0 | 11.5 | 12.0 |
EP 630/4 | 6 : 3 | 13.0 | 15.0 | 15.5 |
EP 800/4 | 7 : 3 | 14.5 | 16.5 | 17.0 |
EP 1000/4 | 7 : 3 | 16.5 | 18.0 | 18.5 |
5-ply belts
Belt | Cover gauge dDp in mm | Belt thickness dG in mm |
Area related belt mass with cover type m"G in kg/m2 with cover type | |
---|---|---|---|---|
Top side : Bottom side | X | Y | ||
Data on the size parameter m"G apply only for the cover gauges as listed providing the range of tolerances: +1.7/−1.0 kg/m² | ||||
EP 800/5 | 5 : 2 | 12.0 | 14.0 | 14.5 |
EP 1000/5 | 6 : 3 | 14.5 | 17.0 | 17.5 |
EP 1250/5 | 8 : 3 | 19.0 | 21.0 | 21.5 |
EP 1600/5 | 10 : 3 | 22.0 | 25.0 | 25.5 |
Previous Product:Airtac SC Standard Air Cylinder, Double Acting - SC63X100
Next Product:PIERBURG PUMP, FUEL, 7.21926.52.0
Products Category
Contact Us
Tel: +86-13323329069
E-mail: bill@foreversupplier.cn
Whatsapp: +86-13323329069
Add: Room 1309 Gongguan xingqiba building, Chenglin road, Hedong district, Tianjin, China
Link